The new Acme Carnival LED Light effect produces an amazing 5 lense light show. Due for release at the end of October 2010.

The Acme Carnival creates a spectacular light show by combining five clusters of brilliant beams and emits an output similar to that of a 250W halogen lamp, but it draws only a fraction of electrical power.  A wide beam coverage fires out dozens of red, green, blue and white beams which project over large areas of walls and floors producing razor-sharp beams of colour. This awesome spectrum of coloured beams makes for a hugely exciting nightclub centerpiece.

The Acme Carnival has powerful LEDs which are rated at 50,000 hours, virtually eliminating the hassle and expense of lamp replacement. When its 320 LEDs are running at full power, it draws a mere 40 watts of electricity, allowing users to save on energy costs and the unit can run all night without shutting down for duty cycles.

A 4 button LED display on the rear of the unit allows DMX control over the Carnival which can be operated via the 4 DMX channels. It can also run without a controller as a sound active effect, or linked in multiples master/slave via XLR cables. The Carnival can also be operated with an optional CA 8 remote controller (sold separately), providing an easy way to control blackout, internal programme selection and other basic functions.

Features:

• DMX channels: 4
• DMX, master/slave and sound active modes
• 320 high powered 5mm LEDs (R:80, G:80, B: 80, W:80)
• Produces unique and exciting LED criss-cross patterns that may be projected on a wall, ceiling or dance floor
• 4 push button LED display
• Wide beam spread covers wide areas

Specifications:

• Power supply: 240V
• Power consumption: 40W
• Dimensions: 457 x 433 x 286mm
• Weight: 7Kgs

The Acme Stormbird is equipped with a single high power 10W LED, which reflects off 4

mirrors through a rotating 3-sided dichroic prism, this produces a vast range of sharp coloured

beams creating highly energized gobo effects that cover a very wide area.

Perfect for any DJ or mobile disco with no need to replace lamps.

Features:

• Plug and play unit producing a unique room filling effect
• Ultra Bright LED Gobo flower with dichroic prism effect
• Equipped with gobo wheel, inner reflector dish and a 3 facet prism
• Sound activated, static and continuous rotation functions
• Gobo wheel is equipped with 15 gobos
• IEC Power In/Out sockets
• Perfect for discos, clubs, bars and mobile DJ’s
• Lightweight and robust metal housing
• No duty cycle, runs all night

Specification:

• Power supply: 240v
• Power consumption: 20W
• LED: Single high power LED
• Dimensions: 292 x 255 x 193mm
• Weight: 3.7Kgs

Acme LED Storm bird in stock

The Acme LED Gobo Flower is powered with a mega bright, long-lasting 10W LED. This means long life reliability and no more replacing blown lamps.

Featuring a superior glass optical system, the new LED Exercet produces showers of moving gobos that can be projected on walls and dance floors. Their rich, saturated colours far outshine those of conventional gobo flowers, and they will never fade.

Features:

• Auto and Sound active modes
• 15 gobos + white
• LED: 1 x Ultra Bright Cool White 10W LED
• Independent switches for control of gobo and dish motors for either auto or sound activation
• Ideal for discos, clubs, bars and mobile DJs etc
• Power consumption: 31W

Specification:

• Power Supply: 240V
• Dimensions: 246 x 192 x 162mm
  Weight: 2.8Kgs

NOW IN STOCK !!

Product code : GOBO 01 – Acme LED Gobo Flower Exercet

The Acme Genesis moving head is in a league of its own, having the most up to date LED technology replacing traditional halogen and discharge lamps, with the use of a single 20W LED.  Featuring 8 seperate rotating gobos with 8 seperate colours plus pure white, excellent built-in programmes, full Pan/Tilt movement, DMX, low power consumption and with 3 different operation modes. In a nut shell this Acme Genesis moving head is lightweight, very bright and looks the business. Can be floor standing or hung with bracket thats supplied.

Features:

• Genesis is an innovative LED moving head combined with the latest LED technology and high effciency optical system.
• 7 DMX channels: Pan/Tilt, Colour, Gobo, Gobo rotation, Strobe and Dimmer
• Built-in programmes in Master/Slave operation triggered by music
• 4 digit LED display for easy use
• Auto Pan/Tilt position correction
• Gobo wheel with 6 gobos plus open
• Colour wheel with 8 colours plus white
• 3 Operation modes: DMX, Master/Slave and Sound active
• Pan: 540 degrees/Tilt: 220 degrees
• Full range dimmer (0-100%) and various strobe speed
• Beam angle: 14 degrees
• Output similar to a 250W lamp
• Extremely long life LED (30,000 hrs rated)

Specifications:

• Power supply: 240V – 50HZ
• Power consumption: 55W
• LED: 1 x 20W LED
• Dimensions: 248 x 194 x 330mm
• Weight 5.6Kgs

Product in stock and on demo – code GENE01

Genesis Twin Case £69.99

The Acme MiracLED creates a spectacular light show that far outshines anything that can be achieved with traditional halogen moonflower effects.
Its four clusters of brilliant beams emit an output similar to that of a 250W halogen lamp, but it draws only a fraction of power.  A wide beam coverage projects over large areas of walls and floors producing razor-sharp beams of colour. When combined together in multiples of four the MiracLED becomes an awesome nightclub centrepiece. Two different hanging brackets (sold separately) can be used to achieve two very different centrepiece effects.

Features:

• DMX Channels: 7
• Master/Slave Built-in programmes
• Controller: Any universal DMX-512 or CA-8 Controller
• LED’s: R: 80, G: 60, B: 48, W: 36 (244)
• Sound Activated
• DMX Linkable or Stand Alone Modes
• Connections: 3-pin XLR Input/Output

Specifications:

• Power Supply: AC240V ~ 50Hz
• Power Consumption: 20W
• Dimensions: 473 x 279 x 103mm
• Weight: 4.72Kgs

Product out of stock – code  MIRA01

Single channel strobe controller which is capable of controlling up to 4 Acme analogue strobes.

Features:

• Speed control
• On/off switch
• Controls up to 4 strobes

Specification:

• Power supply: 240v
• Dimensions: 152 x 59 x 65mm
• Weight: 0.5kgs

Product in stock – code stro01

For use with the Wildzap Strobe

The Acme UV 400 Cannon changes the ordinary into the extraordinary, transforming any space into outer space. The unit’s ultra-bright rays beam down to create an ultimate glow in the dark atmosphere. The UV Cannon can cover a large area due to the 400-watt super-high output black light lamp, so it’s ideal for larger venues, including bowling alleys, roller rinks, stages and clubs.

Features:

• Includes lamp
• 400W UV Super High output Black light
• Ideal for large venues and mobile discos
• Comes with Hanging Bracket.
• Protective front grill

Specification:

• Power supply: 240v )
• Replacement Lamp: lamp64 ( 400w uv )
• Dimensions: 365 x 328 x 328mm ( w/out Bracket )
• Weight: 9.4kgs

Product in stock – code UV01

The Acme AF 2 is a really breath taking flame effect without the use of a real fire. A great visual effect thats ideal for DJ’s and installation applications. Can be used stand alone on legs or wall mounted for installation.

• Flame height: 460mm
• Wall brackets included
• 2 sets of legs included

• Power supply: 240v
• Dimensions: 210 x 210 x 152mm (excluding legs)
• Weight: 2.2kgs

Product out of stock

With the use of one High power 3-Watt LED in each unit the SuperNova produces beams similar in output power to that of a 100W halogen lamp. The package includes 2 x multi-colour and 2 x white moonflower effects which complement each other perfectly. The vivid red, green and blue beams fill the room whilst the white beams cut through the atmosphere creating cool silhouettes. The complete package comes supplied in a heavy duty road bag with a CA-8 controller, DMX cables and G clamps. This effect needs to be seen to be believed.

Features:

• DMX Channels: 2
• Thousands of pre-programs
• Sound active, Master/Slave and DMX modes
• Low heat and low power consumption
• No duty cycle

Pack includes:

• 2 x white, 2 x multi-colour units
• 1 x Ca-8 hand controller
• 3 x DMX cables
• 4 x G clamps
• Heavy duty road bag

Specifications:

• Power supply: 240v
• LED: 1 x 3w each head
• Dimensions: 205.5 x 141 x 127mm each
• Weight: 8Kg (complete package)

PRODUCT DISCONTINUED

The mirror ball effect is back! This club effect from the ’70s has been re-invented and now comes with 3 DMX channels and it’s even brighter than ever! A powerful 3W RGB LED is located inside a rotating spherical case and projects pin sharp beams around a room like a multi-colour mirror ball.

Ideal for use as a centrepiece, this unit projects 34 pin sharp, powerful, brilliant coloured beams, which rotate, flash and change colour around the walls, ceilings and floors, giving a wide room coverage. All of the unit’s beams are produced from one high power 3-watt RGB LED light source and can be controlled via any DMX-512 controller or run by its own internal programmes in Master/Slave mode.

Features:

• DMX channels: 3 (Dimmer/Strobe, Colour, Rotation)
• Built-in programmes
• Master/Slave, Sound Active and DMX modes
• Produces 34 crisp, bright coloured beams
• LED: 1 x 3W RGB
• Pin sharp beams cover a wide area
• Power Consumption:13W
• Fan cooled
• Connection: 3-pin XLR
• Control: Any universal DMX-512 or CA-8 controller

Specifications:

• Power supply: 240V
• Dimensions: 210 x 210 x 179mm
• Weight: 1.8kgs.

Product out of stock – code  ASTR02