Ortofon Pro Silver Concorde Cartridge.

The Ortofon Pro Series of cartridges provides a great balance of sound quality with tracking ability, for virtually any style of music.

With flat, transparent sound across the spectrum and excellent handling ability, the Pro Series represents one of the longest running values in DJ cartridges.

• Output voltage at 1000 Hz, 5cm/sec. : 5 mV
• Channel balance at 1 kHz : 2 dB
• Channel separation at 1 kHz : 20 dB
• Channel separation at 15 kHz : 15 dB
• Frequency range at – 3dB : 20-20.000 Hz
• Frequency response : 20-18.000 Hz + 3 / – 2 dB
• FIM distortion at recommended tracking force, DIN 45.542 : < 1%
• Tracking ability at 315Hz at recommended tracking force : 70 µm
• Compliance, dynamic, lateral : 7 µm/mN
• Stylus type : Spherical
• Stylus tip radius : R 18 µm
• Equivalent stylus tip mass : 0,5 mg
• Tracking force range : 3,0-5,0 g (30-50 mN)
• Tracking force, recommended 4,0 g : (40 mN)
• Tracking angle : 20°
• Internal impedance, DC resistance : 750 Ohm
• Internal inductance : 450 mH
• Recommended load resistance : 47 kOhm
• Recommended load capacitance : 200-600 pF

The Ortofon Concorde DJ S is a solid-built cartridge in a blue nylon material. It has a fine spherical stylus and a special developed and extremely balanced cantilever.

Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJ with the most-needed stringency. Furthermore, it equals very low record wear, an advantage for the busy DJ. The DJ S is definitely worth checking out and has rave reviews all over the world.

Also available in OM Version ( cartridge and stylus that fixes to a headshell ).

Ortofon DJ S Concorde Cartridge Specifications:

• Frequency response: 20 to 18.000 Hz
• Output: 6mV
• Channel separation nominal: 23dB
• Inductance: 450mH/ch
• Weight: 18.5g
• Tracking force: 3 grams
• Recommended load: 47K ohms 200pf
• Stylus tip: Spherical

Product in stock

Ortofon DJ S replacement stylus

The  N500 is the new design of the classic 500 AL-II stylus from Stanton, manufactured in the USA. The N 500 is designed for the new 500.V3 cartridge as well as fitting onto the old 500 or 505 cartridge with no loss in sound quality.

Product out of stock – code 170.579

Please note cartridge not included ( stylus only )

Ortofon DJ series has been known to many as the all rounder, with improved tracking, alongside  accurate sound reproduction.

Featuring a low wear stylus design, the Ortofon DJ’s Concorde cartridge provides excellent groove handling, even with less weight applied.

By gathering information and feedback from DJs all over the world, Ortofon have designed the DJ S series to allow scratching and back cuing, night after night. The Ortofon DJ S Concorde cartridge delivers reliability and robustness and is therefore able to withstand the extreme conditions, pressures and vibrations of the DJ environment.

Ortofon DJ S Concorde Cartridge Specifications:

• Frequency response: 20 to 18.000 Hz
• Output: 6mV
• Channel separation nominal: 23dB
• Inductance: 450mH/ch
• Weight: 18.5g
• Tracking force: 3 grams
• Recommended load: 47K ohms 200pf
• Stylus tip: Spherical

Ortofon DJ S Concorde Cartridge Twin Pack Includes:

• 2 x Ortofon DJ S Concorde Cartridges
• 2 x Stylus
• Cleaning brush
• Aluminium Flight Case

Product in stock

Replacement stylus to be used in Ortofon Scratch OM and Concorde cartridges. For DJs who require increased tracking ability, the Ortofon Scratch cartridge is up to the task. Featuring a reinforced rubber suspension, DJs need not to worry about compromising sound quality and stylus life when working with higher tracking forces. With solid bass reproduction and extended highs, the Ortofon Scratch cartridge is great for any style.

Ortofon Scratch Stylus Specifications:

• Frequency response: 20 to 15.000 Hz
• Output: 7mV
• Channel separation nominal: 25dB
• Stylus tip: Spherical

Product in stock

Replacement stylus to be used in Ortofon DJ S OM and Concorde cartridges. Ortofon DJ series has been known to many as the “jack of all trades”, with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the Ortofon DJ S cartridge provides excellent groove handling, even with less weight applied.

Ortofon DJ S Stylus Specifications:

• Frequency response: 20 to 18.000 Hz
• Output: 6mV
• Channel separation nominal: 23dB
• Stylus tip: Spherical

Product in stock

Replacement stylus to be used in Ortofon Pro S OM and Concorde cartridges. The Ortofon Pro S cartridge retains the overall sonic properties of the standard Pro model, but provides a wider stylus for low wear as well as durability under demanding conditions. No matter what application, the Ortofon Pro S cartridge provides remarkable versatility for virtually any setting.

Ortofon Pro S Stylus Specifications:

• Frequency response: 20 to 18.000 Hz
• Output: 5mV
• Channel separation nominal: 20dB
• Stylus tip: Spherical

Product in stock

The Ortofon Pro S is classed as the entry level cartridge which is ideal for newcomers on the DJ scene who want to start off with decent, but not to expensive equipment.

The Pro S has a spherical diamond stylus which minimizes scratching and a solid cantilever which can survive hectic activity at the turntable. The sound quality is nothing to worry about beating all other brands in this price range. The Pro S is a consistent performer and a fine all-rounder !

Also available in OM Version ( cartridge and stylus that fixes to a headshell ).

Ortofon Pro S Concorde Specifications:

• Frequency response: 20 to 18.000 Hz
• Output: 5mV
• Channel separation nominal: 20dB
• Inductance: 450mH/ch
• Weight: 18.5g
• Tracking force: 3 to 5 grams
• Recommended load: 47K ohms 200pf
• Stylus tip: Spherical

Product in stock

Ortofon Pro S  replacement stylus

With solid bass reproduction and extended highs, the Ortofon Scratch Concorde cartridge is great for any style, providing energetic, in-your-face sound. Heavy duty scratch performance guaranteed!

The Ortofon Scratch Concorde cartridge is up to the task. Featuring a reinforced rubber suspension, DJs need not worry about compromising sound quality and stylus life when working with higher tracking forces. With solid bass reproduction and extended highs, the Ortofon Scratch Concorde cartridge is great for any style, providing energetic, in-your-face sound.

Designed with the help of various DJs, the Ortofon Scratch Concorde cartridge has been developed for rigorous scratching and back-cueing. It is also constructed of a fluorescent neon-red material creating a luminous effect in certain lighting.

Heavy duty scratch performance guaranteed!

Ortofon Scratch Concorde Cartridge Specifications:

• Frequency response: 20 to 15.000 Hz
• Output: 7mV
• Channel separation nominal: 25dB
• Inductance: 450mH/ch
• Weight: 18.5g
• Tracking force: 3 to 5 grams
• Recommended load: 47K ohms 200pf
• Stylus tip: Spherical

Product in stock

Ortofon Scratch replacement stylus

Ortofon Concorde DJ S OM is a solid-built cartridge in a blue nylon material. It has a fine spherical stylus and a special developed and extremely balanced cantilever.

Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJ with the most-needed stringency. Furthermore, it equals very low record wear, an advantage for the busy DJ. The DJ S is definitely worth checking out and has rave reviews all over the world.

Also available in Concorde version

Ortofon DJ S OM Cartridge Specifications:

• Frequency response: 20 to 18.000 Hz
• Output: 6mV
• Channel separation nominal: 23dB
• Inductance: 450mH/ch
• Weight: 18.5g
• Tracking force: 3 grams
• Recommended load: 47K ohms 200pf
• Stylus tip: Spherical

Product in stock

Ortofon DJ S replacement stylus